Now let's get started! (click images to enlarge)

Tools required

Mini flathead screwdriver

1- Start by disconnecting the connector(s) you'd like to replace.

2- Disconnect the wire holder on top of the connector ( 2 tabs on each side of the connector) To remove the spades the easy way simply insert screwdriver into spade hole (circled in green in picture below) and pry away from the spade until the brittle plastic breaks and gently remove the spade (repeat step 2 one at a time) Make sure you reinsert each spade into the exact position of the connector and do them one at a time. The harder way to remove the spades is to insert the screwdriver into the same spot and pry towards the spade and gently tug the wire while the spade is unclipped.

3- Repeat steps 1 and 2 per each connector you'd like to replace. That was easy wasn't it?

If you have any other questions please e-mail me at chris@boostpro.net